Amplificador James LoudSpeaker M1000 10"

The James M1000 mono subwoofer amplifier is a 2U, high efficiency, class D design producing over 1000W of RMS power into both 4 ohm AND 70 volt loads. The M1000 is a hybrid design with an internal linear power supply to provide large reserve current to the class D output stage, ensuring powerful dynamics and tight bass response. A full feature DSP front end can be configured via the 5-button controller and 2-line display on the front panel. Firmware updates can be uploaded via the USB connector.

On the rear, inputs include left/right high-level binding posts for use with speaker output signals, left/right RCA and Left/right balanced XLR's. A pair of left/right RCA outputs provide buffered zero gain signals to feed other amplifiers - useful for connecting multiple M1000's in home theater applications or an additional 70V stereo amplifier in 70V landscape applications.

Especifications:
- Number of Channels. 1
- Built-in DSP: Yes
- Nominal Power Output (8 ohms). 500 WRMS <1% THD
- Nominal Power Output (4 ohms). 1000 WRMS <1% THD
- Nominal Power Output (70V): 1000 WRMS <1% THD
- Typical Power Output: 1080 WRMS <1% THD (4 ohms/70V)
- THD at Full Power: 0.07%
- THD at 1W. 0.08%
- Frequency Response: 10-2kHz
- Frequency Response (LFE): 10-160Hz
- S/N Ratio: 100dB Sub/ 91dB LFE
- Output Noise. 1.5mV Sub/ 2mV LFE
- Input Connectors: RCA, XLR, Dual Bananas
- Input Sensitivity (Unbalanced): 220 mV (RCA)
- Input Impedance (Unbalanced): 20 kohms
- Input Sensitivity (Balanced): 220 mV (XLR)
- Input Impedance (Balanced): 10 kohms
- Input Sensitivity (High Level): 2.6 V
- Output Connectors: Dual Banana Jack
- Line Output: Loop out - RCA - 200mV (Approx. 0 dB Gain)
- 12V Trigger: Yes
- Auto Off Time: Adjustable 5 - 30 Mins 5 Mins Steps
- Auto-on Sensitivity: 3.2 mV
- AC Power Req: 115V/230V switchable
- Width: 16.75 in (425.45 mm)
- Depth: 14.23 in (361.44 mm)
- Height: 3.5 in (88.90 mm)
- Rack Spaces: 2U
- Supplied Accessories: Rack Ears, Remote